Backtrack:  
Blog
 
showing all posts
 
Flying season 2010 official kick-off
by lunarg on March 14th 2010, at 00:43
And so the flying season has started again, pretty much in the same way it ended: it was a dark damp and cold day, and not at all without technical difficulties.
The issues with our tow plane that were supposed to be fixed weren't really fixed. Our backup did perform flawlessly (a luck we did not have at the end of last season).

All of the little troubles and discomforts did not thwart the pleasure of having done about a dozen flights, most of them check flights to sign on after a long winter's break. Although having flown last week, it feels good to have flown a succesful tow and subsequent   ...
 
Albatros goes winching @ Weelde
by lunarg on March 11th 2010, at 22:34
/media/gallery/552fdcc49228028140837daed0332efb/8931678748fb96aceec18564eb963b13.jpg
/media/gallery/552fdcc49228028140837daed0332efb/9ed7974c9a44cf3cb5b415a15c02c837.jpg
/media/gallery/552fdcc49228028140837daed0332efb/b549a0a3655f608a1e999deb8fbce1c2.jpg
/media/gallery/552fdcc49228028140837daed0332efb/44db782a36e65845a3af5af7712022ee.jpg
 
Configure battery packs on your APC UPS
by lunarg on March 3rd 2010, at 17:48
Suppose you have an APC UPS and have just purchased a battery pack to go with it. Connecting the battery pack is pretty straightforward, but did you know you need to tell your UPS that an additional battery pack has been installed? Setting this in your UPS, optimizes the usage of the entire battery capacity.

If you are using PowerChute software, and have connected the UPS to a computer using serial, USB or network interface, you will be able to set this parameter in the software.

Log into the management card using your web browser (default user and password: apc).Navigate to UPS, and inside   ...
 
Seamless compression with Squeeze
by lunarg on March 1st 2010, at 22:45
Seamless file compression has found its way to Mac OSX 10.6 with Squeeze.
The application is a system applet, implementing the new HFS compression technology to transparently compress folders you configure to be compressed. Each folder added with Squeeze will be compressed in the background. To the user, they are just regular files, but they will take up less disk space.

Using Squeeze is easy: just select the folders you want to get compressed, and it will silently work in the background to compress the contents of those folders. Whenever you use any of the files, it will be read like any   ...
 
List of sysprep files for VMware Converter
by lunarg on March 1st 2010, at 11:21
In order to succesfully convert Windows systems to a VMware virtual machine, you need to install the sysprep files of the to be converted host. Below is a list of downloads to these sysprep files:

The base folder of where to put the files is always:

Quote

%ALLUSERSPROFILE%\Application Data\VMware\VMware vCenter Converter Standalone\sysprep

Extract contents to: base-folder1.1 Link: http://www.microsoft.com/downloads/details.aspx?FamilyID=0C4BFB06-2824-4D2B-ABC1-0E2223133AFB. Extract contents to: base-folder\2k Link: http://download.microsoft.com/download/D/2/C/D2CBC4DA-5F0D  ...
 
Raptors finally arrived
by lunarg on February 24th 2010, at 19:26

Finally got the final parts of my computer: the HD's.

Currently, I was using an old HD (a Maxtor 500GB) from my previous system. The idea with the new disks is to set up two Raptors in a RAID0 configuration. As Raptors are already fairly fast, the additional RAID0 - I've been using this method a few years already - should give it an extra edge.
I'm keeping the old HD in to have additional 500 GB of pure storage (like downloads and such, things that don't need the speed).

 
Albatros organizes Condor Soaring competition
by lunarg on February 19th 2010, at 16:52
Soaring club Albatros (EBZH) has organized an online competition in the soaring flightsim Condor. In this competition, participants have to fly a set of tasks where they have to try and get the highest score by obtaining the highest average speed.

There are seven tasks in the Provence, set out of Vinon. The other seven tasks are all based in Slovenia (the default scenery of Condor). The tasks prove to be a mix of flying by thermals, and a good deal of ridge flying. For each task, up to three tries are possible. The best of three count as the final result for a given task.

Results of the comp  ...
 
History: my former virtual desktops
by lunarg on February 13th 2010, at 15:48
/media/gallery/553b072b22f03e4187350f5874b7697b/3d16984cf907d3438eb5a308dce3b70b.jpg
/media/gallery/553b072b22f03e4187350f5874b7697b/fdd10e36c06c79aeb000152af42ba3bc.jpg
/media/gallery/553b072b22f03e4187350f5874b7697b/7fbdbf8cb911815d63eb2befe44be8c1.jpg
/media/gallery/553b072b22f03e4187350f5874b7697b/acd3790aa58417c849f2994f1082786e.jpg
 
Installing Windows XP alongside Vista or 7
by lunarg on February 13th 2010, at 15:25
If you come across a problem where you can't do anything but install a Windows XP alongside a Vista or Windows 7, don't despair, as it is quite easily done.

First you have to repartition your HD. If you have a second HD you're not using, you can ignore this step. If not, you probably have to resize one of the present partitions. But in order to get the maximum out of the resizing, make sure the partition you're about to resize, is defragmented properly. Note that you cannot resize FAT32 partitions (but who uses that nowadays, anyway).
The resizing can be done through Dis  ...
 
Telenet applies Fair Use Policy
by lunarg on February 11th 2010, at 13:23
In Belgium, internet provider Telenet announced the application of fair use policy on a number of their internet subscriptions. Additionally, two new subscriptions have been launched under the common name FiberNet, which will be using the new EuroDOCSIS 3.0 specification to obtain the higher speeds.
After Belgacom, Telenet is the second provider in Belgium to apply fair use policy.

The fair use policies will be applied to the TurboNet and FiberNet subscription at the beginning of July this year. ExpressNet and TurboNet will also benefit from a speed increase (30Mbps instead of 25Mbps). The  ...
 
[MyHW] Sil
by lunarg on February 9th 2010, at 23:36
/media/gallery/2c70adaa14ae316546e55ea43260f9af/8e6e0962e1c744ccefba92817200f336.JPG
/media/gallery/2c70adaa14ae316546e55ea43260f9af/fde3a5190d64eea4f9752a5d09228ecd.JPG
/media/gallery/2c70adaa14ae316546e55ea43260f9af/4f30a5e622b51859fd25ea17892c4905.JPG
/media/gallery/2c70adaa14ae316546e55ea43260f9af/5556306294ab97ffaa5c6a795a5964ae.JPG
 
The history of my home desk
by lunarg on February 6th 2010, at 18:11
/media/gallery/f2617344fbf3cf13236617d737a6be55/6b2b793dcf56cd9edf1e3b9fbeef69c8.jpg
/media/gallery/f2617344fbf3cf13236617d737a6be55/69bef3511fd53b53120dcc8795ec1398.jpg
/media/gallery/f2617344fbf3cf13236617d737a6be55/5aa7c12988b715f6b3ec925f151aa743.jpg
/media/gallery/f2617344fbf3cf13236617d737a6be55/b90ff225c62f344067d01177706d59af.jpg
 
Terminal Server 2008 setup fails with 0x8004005 in SBS 2008 domain
by lunarg on February 3rd 2010, at 11:10
When installing the Terminal Services role on a 2008 member server in a SBS 2008 domain, you may run into the following error:

Quote

Attempt to configure Terminal Server failed with the error code 0x8004005.
Error HRESULT E_FAIL has been returned from a call to a COM component.

The problem surfaces when the 2008 member server was added to the domain, it was misplaced in the SBSComputers OU, rather than the SBSServers OU. As a result, a certain client group policy, which is linked with the SBSComputers OU, interferes with the installation of Terminal Services.

To solve this problem, follow   ...
 
Direct download links to Adobe products through FTP
by lunarg on February 2nd 2010, at 17:53

Adobe has an FTP site available where you can directly download installers and updates of their products, without going through the site, license agreements and download managers.

Adobe Acrobat Reader & Adobe Reader

For PDF reading, the direct links are:

Links to other products will follow. Keep an eye on this post on the site.

 
Remote Desktop Manager 5.7.1 released
by lunarg on February 2nd 2010, at 14:30
Devolutions has come up with a new release of their Remote Desktop Manager: a software tool allowing management of all your remote connections (like VNC, RDP, SSH) and so much more. Its latest version is a vast improvement over their previous stable releases, and is a must-have tool for all ICT employees out there with a lot of remote connections to manage (such as myself).

It comes in two flavours:

The Standard Edition is freeware and houses the majority of the features. It allows the storage to various datasources, including MS Access (containing shared access if you will).The Enterprise E  ...
 
Incoming PPTP VPN passthrough on OpenWRT
by lunarg on February 1st 2010, at 16:46
To set up a Windows PPTP VPN server behind your OpenWRT enabled router, you need to forward the necessary ports and protocols, and install the proper modules.

Finding information about how to do this was a lengthy process. I never actually found the necessary info (although I noticed there are quite a few people which are rather clueless about networking; makes me wonder why they're bothering with OpenWRT in the first place, it's not the easiest firmware out there).
But I've managed to compile the bits and pieces of various sources into a coherent mass. It's not a guide in the literal sense,   ...
 
Change SmartHost outgoing port in Exchange 2007
by lunarg on January 28th 2010, at 17:28
I've written an article before on how to change the outgoing SMTP port for SmartHost in Exchange 2003. Now, I have to do this again for Exchange 2007 as they've changed this procedure.

When you're unable to send e-mail directly to the internet (using MX), you probably have to set up a SmartHost to relay the e-mail for you. This is basically your ISP's SMTP server, but can be another server as well.
In certain cases, the default SMTP port (port 25) cannot be used to connect to the SmartHost, so you have to change this to something else. Gmail for instance, uses port 587 for SMTP. Other 3rd par  ...
 
Obtain MAC address of the wireless access point connected to
by lunarg on January 27th 2010, at 11:28
In Windows, it is possible to obtain the MAC address of the wireless access point you're connected to. This is handy when you have multiple access points with the same ESSID (i.e. "roaming") and want to know which one you're connected to. This is done with the netsh CLI tool, available since Windows XP.

To do this, start a command prompt, and type in:

netsh wlan show interfaces

This shows all wireless interfaces on your system. When your wireless is active and connected to an AP, you get output similar to this:

Name : Wireless Network Connection   ...
 
[MyHW] Dawn
by lunarg on January 24th 2010, at 23:18
/media/gallery/2deb22e4bf0b07c505ece0f5e5801000/a843002cbd830f489228331914733e49.JPG
/media/gallery/2deb22e4bf0b07c505ece0f5e5801000/000be08d753e4ae5ab58e29d62ad5549.JPG
/media/gallery/2deb22e4bf0b07c505ece0f5e5801000/828409ede0b7c4ccf1843c10849564db.JPG
/media/gallery/2deb22e4bf0b07c505ece0f5e5801000/0b69d428c6868fd6b88148085c2576e6.JPG
 
[MyHW] Sakura II
by lunarg on January 23rd 2010, at 23:31
/media/gallery/deb4031eeec2228e12895b73c2fa176f/98dd96d7273d5c4937486efb9f2e2fbc.JPG
/media/gallery/deb4031eeec2228e12895b73c2fa176f/b8e13a79bb482ecf50734028dbd620d3.JPG
/media/gallery/deb4031eeec2228e12895b73c2fa176f/4f08612639d1511bfce5743df3495c83.JPG
/media/gallery/deb4031eeec2228e12895b73c2fa176f/4f045faa766431f607dc642fb3251972.JPG
 
 
showing all posts
 
 
« ‹March 2010› »
SunMonTueWedThuFriSat
 123456
78910111213
14151617181920
21222324252627
28293031   
 
Links
 
Quote
« Linux says one, Windows says the other, the right tool for the right job says I. »
Me